|
|
|
|
On side, trim and glue the top edge of fabric.
|
|
|
|
On tail section cut opening for control arms.
|
|
|
|
Brush on glue before laying fabric.
|
|
|
|
|
|
Placing clamps on fabric will hold tight enough to size fabric.
|
|
|
|
Overlap fabric about 1 inch onto bottom.
|
|
|
|
Finished glueing leaves skin looking loose.
|
|
|
|
|
|
First pass should hit the loosest areas first not the entire side.
|
|
|
|
After second pass looks great.
|
|
|
|
Glue applied to forward section of fuselage.
|
|
|
|
|
|
After top bottom section overlapped to bottom.
|
|
|
|
After ironing Aircraft placed back on horses.
|
|
|
|
Only have the right side to do now.
|
|
|
|
|
|
Lay on side and glue areas to be covered.
|
|
|
|
|
|
|
Latex based paint.
|
|
|
|
We changed from the darker UV coatings to the light gray.
|
|
|
|
Should be done March 1, yes 2004.
|
|
|
|
|
|
ELT on board. In the future these might be mandatory.
|
|
|
|
Painting is really fast.
|
|
|
|
Exhaust and muffler are Ceramic coated. Much better than powder coating.
|
|
|
|
|
|
Still a lot of parts on the floor to be put together.
|
|
|
|
Here is the Latex paint left over after painting.
|
|
|
|
Putting gas door on.
|
|
|
|
|
|
Gauges and a nice looking dash.
|
|
|
|
Tail fethers drying.
|
|
|
|
Installed engine only has 8 hours on it.
|
|
|
Skinning 2 & 3
